China best Drag Conveyor Chain and Sprocket wholesaler

Product Description

drag conveyor chain and sprocket

Introduction
Horizontal scraper chain conveyor is bulk content conveying tools, which consists of head part with driving gadget, middle casing, tail part, rigidity gadget, as effectively as scraper chains. MS buried scraper conveyor is commonly utilised in cement plant, coal, metallurgy, mining, light-weight, construction, chemical, grain, power industries and so forth.

Rewards and Functions
one.Totally enclosed structure, without having air pollution, environmental welcoming.
2.Straightforward framework, convenient set up and servicing.
three.Horizontal or slightly inclined transportation, angle can be from 0° to 30°.
4.Multiple substance feeding point and discharging position in accordance to necessity.
5. Trough width can be a hundred and sixty-500mm to satisfy various content types and capacity.
6. Types of scraper chain, to meet diverse types of material.
7. Conveying distance is up to 80m with materials temperature reduced than 120ºC.
8. With screw consider-up system, can get-up by itself immediately, to stay away from chain consider off.
9. Reducer motor model can be can be domestic or imported: Tailong,SEW,Siemens and many others.
ten.Can be disassemble into numerous sections, preserve room throughout transportation.

Technological Parameter:
 

Selection Conditions 

We mainly give the adhering to equipments :

Scraper Conveyor Technical Performance
Type MS16 MS20 MS25 MS32 MS40
Trough Width 160 200 250 320 400
Allowed Material Density Range 0.2-2.5t/m³
Max.Conveying Distance 120m
Conveying Capacity speed m/s 0.16 0.16 0.16 0.16 0.16
capacity m³/h 15 23 36 59 83
speed m/s 0.2 0.2 0.2 0.2 0.2
capacity  m³/h 18 29 45 74 104
speed m/s 0.25 0.25 0.25 0.25 0.25
capacity  m³/h 23 36 56 92 130
speed m/s 0.32 0.32 0.32 0.32 0.32
capacity  m³/h 29 46 72 118 166

###

♦Material to be processed: _____ ♦Max. granule size of the feeding material: ____mm
♦Handling capacity (Ps. It means the total ♦Percentage of Max. granule in material:_________%
material capacity feeding from the inlet): _____t/h ♦Upstream equipment (Ps. It means what kind of
♦Bulk Density: _____t/m3 equipment is used to feed the material): _____
♦Conveying distance(distance  between  ♦Downstream equipment (Ps. It means what kind of
 inlet and outlet):__________m equipment is used to discharge the material): _____
♦Material size:____mm ♦Installation form is horizontal or inclined : ________;
♦Material temperature: _______ ºC If it is inclined,what is the inclined degree________° 
♦Water content:____% ♦Working power supply: _____V ______HZ 
♦Material is corrosive or not: ____ (Ps. Yes or No)  

###

Vibrating Screen Rotary vibrating screen
Ultrasonic vibrating screen
Gyratory screen
Trommel screen
Linear vibrating screen
Circular vibrating screen
Dewatering screen
Vibrating feeder
Belt Conveyor Belt conveyor
Sidewall belt conveyor
Portable belt conveyor
Shuttle conveyor
Tripper
Bucket Elevator Efficient bucket elevator
Belt bucket elevator
Ring chain bucket elevator
Plate chain bucket elevator
Cement bucket elevator
Silo bucket elevator
Screw Conveyor U-type screw conveyor
Cement screw conveyor
Pipe screw conveyor
Scraper Conveyor Horizontal scraper chain conveyor
Incline scraper chain conveyor
Grain scraper chain conveyor
Scraper Conveyor Technical Performance
Type MS16 MS20 MS25 MS32 MS40
Trough Width 160 200 250 320 400
Allowed Material Density Range 0.2-2.5t/m³
Max.Conveying Distance 120m
Conveying Capacity speed m/s 0.16 0.16 0.16 0.16 0.16
capacity m³/h 15 23 36 59 83
speed m/s 0.2 0.2 0.2 0.2 0.2
capacity  m³/h 18 29 45 74 104
speed m/s 0.25 0.25 0.25 0.25 0.25
capacity  m³/h 23 36 56 92 130
speed m/s 0.32 0.32 0.32 0.32 0.32
capacity  m³/h 29 46 72 118 166

###

♦Material to be processed: _____ ♦Max. granule size of the feeding material: ____mm
♦Handling capacity (Ps. It means the total ♦Percentage of Max. granule in material:_________%
material capacity feeding from the inlet): _____t/h ♦Upstream equipment (Ps. It means what kind of
♦Bulk Density: _____t/m3 equipment is used to feed the material): _____
♦Conveying distance(distance  between  ♦Downstream equipment (Ps. It means what kind of
 inlet and outlet):__________m equipment is used to discharge the material): _____
♦Material size:____mm ♦Installation form is horizontal or inclined : ________;
♦Material temperature: _______ ºC If it is inclined,what is the inclined degree________° 
♦Water content:____% ♦Working power supply: _____V ______HZ 
♦Material is corrosive or not: ____ (Ps. Yes or No)  

###

Vibrating Screen Rotary vibrating screen
Ultrasonic vibrating screen
Gyratory screen
Trommel screen
Linear vibrating screen
Circular vibrating screen
Dewatering screen
Vibrating feeder
Belt Conveyor Belt conveyor
Sidewall belt conveyor
Portable belt conveyor
Shuttle conveyor
Tripper
Bucket Elevator Efficient bucket elevator
Belt bucket elevator
Ring chain bucket elevator
Plate chain bucket elevator
Cement bucket elevator
Silo bucket elevator
Screw Conveyor U-type screw conveyor
Cement screw conveyor
Pipe screw conveyor
Scraper Conveyor Horizontal scraper chain conveyor
Incline scraper chain conveyor
Grain scraper chain conveyor

buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.
chain

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.
chain

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.